- Home
- >
- Products >
- Texturing Additives >
- Siluoer 18 Series of Texture Preparation
Product Categories
- Micronized Wax
- Texturing Additives
- Siluoer Series of Texture Preparation
- Siluoer 2 Series of Texture Preparation
- Siluoer 3 Series of Texture Preparation
- Siluoer 5 Series of Texture Preparation
- Siluoer 6 Series of Texture Preparation
- Siluoer 7 Series of Texture Preparation
- Siluoer 8 Series of Texture Preparation
- Siluoer 9 Series of Texture Preparation
- Siluoer 10 Series of Texture Preparation
- Siluoer 11 Series of Texture Preparation
- Siluoer 12 Series of Texture Preparation
- Siluoer 13 Series of Texture Preparation
- Siluoer 15 Series of Texture Preparation
- Siluoer 16 Series of Texture Preparation
- Siluoer 18 Series of Texture Preparation
- Siluoer 19 Series of Texture Preparation
- Siluoer 20 Series of Texture Preparation
Overview: Texture Preparation is a powdery texture agent that imparts a surface texture to the wire. The nature and effect of the texture depend on the proportion of Texture Preparation added.
Typical physical properties: Appearance White powder Density 0.96g/cm3 Melting point 260°C
Characteristics and uses
1. The Texture Preparation feels smooth.
2. Chemically stable, resistant to ultraviolet light, light, heat, acid and alkali, excellent in variety, uniform in particle size and good in dispersibility. It has good compatibility with materials such as TPE/TPU/PVC and good suspension.
3. It is applied to all kinds of wires, giving the surface of the wire a uniform matte matte effect, smooth matte feel and matte matte finish, increasing the scratch resistance and resistance of the wire and improving product evaluation.
4. Can be extruded, blow molded, or masterbatch re-extruded, blow molded.
Scope of application
TPU data line, TPE data line, PVC data line, headset line, power line and other wires
Safety certificate
Siluoer18 series wire extrusion Texture Preparation has been tested by environmental protection and safety, and it is safe and meets the latest EU environmental protection requirements.
Storage: Non-dangerous goods, can be stored for 24 months under dry room temperature. Please keep them well after use.
Siluoer18 series wire extrusion Texture Preparation specification parameters
| Model | Average particle | Density (25°C) | Temperature resistance | Slip performance | Refraction rate | Anti-friction performance | Luminous rate | Application range | Characteristic |
| Siluocer18005 | 5 μm | 0.99 g/cm³ | 360 °C | 8 | 1.47 | 9 | 0.88-0.921m²/g | PC, PE, PMMA Plastic | Fine sand grain effect |
| Siluocer18010 | 10 μm | 0.99 g/cm³ | 360 °C | 8 | 1.47 | 9 | 0.88-0.921m²/g | PC, PE, PMMA Plastic | Fine sand grain effect |
| Siluocer18020 | 20 μm | 0.99 g/cm³ | 360 °C | 8 | 1.47 | 9 | 0.88-0.921m²/g | PC, PE, PMMA Plastic | Fine sand grain effect |
| Siluocer18030 | 30 μm | 0.99 g/cm³ | 360 °C | 8 | 1.47 | 9 | 0.88-0.921m²/g | PC, PE, PMMA Plastic | Fine sand grain effect |
| Siluocer18040 | 40 μm | 0.99 g/cm³ | 360 °C | 8 | 1.47 | 9 | 0.88-0.921m²/g | PC, PE, PMMA Plastic | Medium sand grain effect |
| Siluocer18050 | 50 μm | 0.99 g/cm³ | 360 °C | 8 | 1.47 | 9 | 0.88-0.921m²/g | PC, PE, PMMA Plastic | Medium sand grain effect |
| Siluocer18060 | 60 μm | 0.99 g/cm³ | 360 °C | 8 | 1.47 | 9 | 0.88-0.921m²/g | PC, PE, PMMA Plastic | Medium sand grain effect |
| Siluocer18080 | 80 μm | 0.99 g/cm³ | 360 °C | 8 | 1.47 | 9 | 0.88-0.921m²/g | PC, PE, PMMA Plastic | Medium sand grain effect |
| Siluocer18090 | 90 μm | 0.99 g/cm³ | 360 °C | 8 | 1.47 | 9 | 0.88-0.921m²/g | PC, PE, PMMA Plastic | Medium sand grain effect |